1、电源电压：110V/220V 2、主轴驱动率：180W 3、主轴转速：300-3000rpm 4、X轴滑板行程：210mm 5、Y轴滑板行程：110mm 6、Z轴滑板行程：90mm 7、步电机分辨率：0.0025mm 8、步电机定位度：0.01mm 9、大切割深度：50mm 10、作台旋转：360°±0.5° 11、载物板：80mm×25.4mm 12、载体盘：Φ80mm
冲击试验低温槽 型号:HAD-DWC-40 型号 HAD-DWC-40 HAD-DWC-60A HAD-DWC-80 HAD-DWC-100 温度范围 30～-40℃ 30～-60℃ 30～-80℃ 30～-100℃ 控温度 ±0.5℃ 作槽 120mm*120mm*70mm（可根据用户要求定做） 可装式样数量 ＞60（仅对金属夏比缺口冲击试验） 作介质 无水乙醇（酒槽） 电源供电 220V～240V,50HZ 外形尺寸 910mm*500mm*870mm 净重 约90kg HAD-DWC-40型冲击试验低温槽操作简单方便，无化学污染、无噪音、无振动、无磨损、体积小、重量轻、操作简单、控制度、可连续作等点，是金属材料低温冲击试验中的理想的试样冷却、保温设备。DWC型冲击试验低温槽同时亦可用于其他低温检测和试验作。本冲击试验低温槽是我公司根据GB/T229-2007《金属夏比缺口冲击试验方法》中对低温装置的要求而新研制开发的压缩机制冷设备。
5.自动压样机/ 型号:HAD-600KN 我公司的压样机是X射线荧光光谱仪的配套设备。HAD-400KN，HAD-600KN型压样机采用内模压样方式，操作方便、效率、性能稳定可靠。
产品结构点 Characteristics of the Products ●内模式压样，压头行程100毫米?？捎糜谂鹚?、钢环、铝杯、塑环等各类压样方式，适用范围广，作稳定。 Adopted internal mould sample-press, pressure head travel is 100 mm. The products can be used for various kinds of sample-pressing methods such as boric acid, steel ring, aluminum cup, plastic ring etc., with characteristics of broad scope of application and stable working.
●有的缓加压、慢退模程序更有利于保证压样合格率、提压样样量。 With specific programs of slow pressurization and slow mould-release, the products are favorable to ensure acceptance rate of sample-press, improve sample quality of sample-press.
●别的集成液压管道?？椴唤鍪棺樽案臃奖?，而且减少了漏油机会。 With integrated hydraulic pipe block being specially designed, it not only makes assembling easier, but also reduces the chance of oil leak.
●加厚的油箱盖板使油泵和电磁阀的动作噪音更小。 With thickening oil-tank cover-board, it makes acting noise of oil pump and solenoid valve smaller.
●采用由可控硅集成的固态?？樘娲车慕哟テ鞅苊饬擞捎诘缁捣逼舳鸬母骼喙收?，有效提了该分的使用寿命。 Adopted solid-state block of integrated silicon controlled to replace traditional contactor, it avoids various kinds of troubles caused by frequent starting of motor and efficiently increases service life of this section.
●继电器控制分采用印刷板焊接结构，减少了控制箱的接线，提了电器控制的可靠性。 The Control section of relay is adopted the welding structure of printed circuit board, it reduces wiring of control box, improves reliability of electric control.
●控制电源采用低压24V，作更加安可靠。 Control power source is fully adopted low-voltage of 24V, which makes work safer and more reliable.
●结构紧凑，占地面积小。 With compacting structure, small floor space 参数
大压片压力60tf (吨)
模具 硼酸、钢环、铝杯和塑料环
压头大行程100mm
压片保压时间0~999 秒
供电电源380V
额定率1.3kw
外型尺寸1180x720x530mm
净重420Kg
| 
